How to get rid of your window mold?

One of the many issues that home owners face is the occurrence of mold on their walls. This can be a difficult little mess to face, but it is not as hard to get rid of as people may think. The most difficult aspect about getting rid of mold on walls is when an interior wall has mold. The reason for this is the fact that interior walls are usually made of drywall which is a very porous material and this means that the mold spores can get deep into the material itself and be troublesome to eradicate.

One of the huge problems with mold on a wall is the health issues created by the mold. Mold releases spores into the air to spread itself and breathing these spores can cause major upper respiratory conditions. This is just one of the reasons to not only do away with the unsightly mold, but also to kill the mold itself.

The most common household item that can get rid of mold on walls is bleach. If the wall is unpainted or if the paint is not a latex paint, then it is important to start with diluted bleach. Care should be taken to have the proper ventilation. Many times a room with mold on the walls has either been closed off because of the mold or may have never had proper air flow in the first place. Remove everything from the room, as later you may need to examine the contents of the room to find what may be causing the mold. Make sure there is no standing water anywhere in the room. You may have to look in and under cabinets for water. If you cannot open a window, then get a box fan and put it in the doorway to pull the bleach fumes out of the room. Use a bucket with half bleach and half water and a normal household sponge. Wear rubber gloves as the bleach can be hard on the skin.

To get rid of the mold on the walls use the sponge a little wet, but not dripping. Do not start off scrubbing, instead use the sponge to basically paint the wall with the diluted bleach. On most walls it will be easy to see where you have wiped and where you have not. Use just one stroke with the sponge where the mold is and also a little bit to the outside of the molded area also. Once all of the affected area has been covered, let the solution sit for several hours and check your progress. The bleach will not only kill the mod, but also clean the wall and bleach away the mold.

This may take a few applications and you may have to decrease the dilution of the bleach. Be careful to not soak the drywall too much, as it is can become damaged from the additional moisture. If you have been looking for how to get rids of mold on walls, this is the best and safest solution. Also, once the mold has removed, check with your local hardware store for a chemical that removes moisture from the air. There are several types available and some are safe for pets and children. It should be a plastic bag of either gravel or gritty sand like material and absorbs the excess moisture in the air. This will help keep the mold from returning in the future.

It is a very serious issue when you are dealing with mold in your home. This has the ability to produce hazardous living conditions for you and your family. Therefore it is important that you learn How to Get Rid of Mold on Walls as soon as possible. Good luck and remember to clean thoroughly.

Mold removal and mold remediation in Fredericton by Mold Busters – The mold removal experts. We provide Mold removal in Fredericton, inspection, remediation services and Asbestos testing in Fredericton and nearby areas for years.